Set of 3 solar garden balls 30cm 40cm 50cm

We offer you a set of 3 RGB solar balls with sizes 30, 40 and 50 cm. Bullets shine in 8 colors.

• Water tightness - degree of protection - IP67
• Solar battery: rechargeable 3.7V 2000 ma Li
• Remote control up to 10 m
• Battery for remote control: CR2025 (3V)
• Working temperature of the device: - 14 to +35.
• Total charging time: 8 hours with direct solar radiation, more than 8 hours during cloud cover, precipitation or winter.
• Operating time: from 4 to 8 hours after full charging.
• Color: change of colors, 7 variants available

Warning / NOTE !:

• It's not a toy. Keep away from children
• Keep the product away from chemicals, liquids, and heat sources
• Do not jump or stand on the ball or sit down.

Taking care of the lamp

• Use a damp cloth to clean, wipe dry with a cloth

Landing

• Step 1. Place the lamp in a sunny place to recharge it, do not cover anything.
• Step 2. When it gets dark, the lamp will light automatically.
• Begin use with a full battery, i.e. Place the lamp in a sunny place and charge for 2-3 days, switching off after lighting up in the evening. Such top-up should be repeated several times a year. Mandatory during winter use.
• On days of low sunlight, you can turn the lamp off with the remote control after lighting up, so that the next day you can recharge the battery, which guarantees a longer lighting time and increases the service life.

Note / important:

• The lamp does not light up in the day if it is not placed in a dark place.
• The lamp shines automatically at dusk or when it is in a dark place.

Using the remote control

• Important: first, remove a small piece of plastic from the pilot's cover before proceeding.
• ON / OFF: for switching the lamp on / off.
• Press and hold ON or OFF on the remote control
• The OFF button turns off the lamp, the ON button makes it shine.
• PLAY / PAUSE - color change mode
• When the power is on, press the PLAY / PAUSE button, the backlight color will change through all available options. When scrolling colors, press the PLAY / PAUSE button to select your favorite color.
• COLOR - color selection mode.
• When the lamp is on, press the COLOR button on the remote control to select 7 individual colors. Pressing the eighth time, the lamp will go into blinking mode and display all colors one by one automatically. Pressing the ninth time, it will return to the initial mode.
• BRIGHT (+/-) mode for changing the intensity of illumination.
• At the initial setting, the intensity is set to the maximum level. When the lamp is on, press the "BRIGHT -" button on the remote control to decrease the intensity. Pressing 4 times will cause the lowest available level of light intensity. To increase it, press "BRIGHT +".
• QUICK / SLOW adjust the color change / flashing speed.
• The initial setting is slow for changing colors. Press the QUCISK / SLOW button to select the color change / flashing speed.

Battery replacement (for remote control)

• If the remote control is not possible, replace the battery.
• Press the latch on the battery cover, and then remove it
• Remove used batteries and replace with new ones. Attention! When inserting the batteries, pay attention to the correct polarity.
• Make sure that the battery is inserted in the right way (poles)
• Do not short the power terminals
• Use batteries properly