Aluminium NORLYS ASKER 1360AL outdoor pole light LED 12 W 1128 lm 3000 K IP65 216 cm

NORLYS ASKER 1360AL is a two-section outdoor pole light in the light Aluminium finish, intended for a fixed exterior installation. Its integrated LED module consumes 12 W and delivers 1128 lm of warm 3000 K light in an asymmetric downward distribution. Article 1360AL and EAN 7042891360095 identify the exact Aluminium version rather than black 1360BL or graphite 1360GR.

12 W LED, 1128 lm and 3000 K

The built-in LED module is supplied and carries an L70/B50 rated life exceeding 72,000 hours. Luminaire output is 1128 lm from 12 W, equivalent to 94 lm/W. Warm 3000 K light is accompanied by CRI 80 and SDCM3 colour consistency. This integrated source should not be treated as a consumer-replaceable bulb; work on the module and control gear must follow the producer instructions. The included light source has energy-efficiency class C.

A 216 cm pole with a 39 × 11 cm head

The pole stands 216 cm high, while its horizontal head measures 39 cm long and 11 cm deep. A square base is 24 cm wide, and the two-section construction makes the tall body easier to transport and assemble. Painted aluminium forms the structure, with a transparent textured polycarbonate optical cover. Weight is 10.54 kg net and 12.11 kg gross. The installed night view makes a useful secondary image because it shows real scale and the actual pattern produced along a path.

Asymmetric downlight with phase dimming

The optic produces a one-sided downward distribution that is symmetric about the head axis and described as asymmetric relative to the pole. ULOR 0% means no designed light is emitted above the luminaire horizon. This version supports trailing-edge phase dimming, subject to a compatible controller and correctly designed installation. Determine pole spacing from a lighting plan and photometric data rather than wattage alone, because mounting height and distance materially affect coverage and uniformity across the surface.

IP65, IK10, Class I and base mounting

IP65 indicates a dust-tight enclosure protected against water jets, while IK10 confirms high mechanical impact resistance. Class I construction requires a correctly connected protective earth. The base has four Ø12 mm holes on 200 × 200 mm centres; anchors must suit the foundation and the anchoring kit is an accessory. Install with power isolated on a stable level base that allows drainage. NORLYS provides a five-year warranty and states a 25-year anti-corrosion warranty subject to its defined conditions.