Max Light Window H0020 white recessed LED light 18 W 3000 K IP20

Max Light Window H0020 is a square white recessed fitting with an integrated 18 W LED module producing warm 3000 K light. Its visible face measures 16.5 × 16.5 cm, while installation requires a 14 × 14 cm cut-out and 10 cm of depth. A power supply for connection to 230 V is included.

A continuous square lighting surface

A broad opal panel occupies most of the front, framed by a narrow white border that emphasises the regular geometry. The integrated LED module has a fixed 3000 K colour temperature, creating a warm effect for living interiors and circulation spaces. The current manufacturer page does not state luminous flux or colour rendering, so those values should not be inferred from wattage alone. H0020 can be used as a single point or arranged in a consistent grid of several recessed fittings.

Dimensions and ceiling cut-out

The visible square is 16.5 × 16.5 cm. Recessing the body requires a 14 × 14 cm square opening and 10 cm of clear depth. The difference between face size and cut-out allows the trim to cover the cut edge. Before making an opening, confirm the ceiling structure, cable route and space needed for both the fitting and supplied driver. Spring clips visible on the product are designed to hold the body securely in the prepared ceiling.

White aluminium with an IP20 rating

The body is aluminium with a white finish that sits discreetly against a light ceiling. The manufacturer's current product page specifies IP20. This rating is intended for dry interiors and does not provide protection against water. If installation is considered in a bathroom or another humid room, a qualified electrician must assess the exact electrical zone and applicable regulations. H0020 should not be treated as an IP44 fitting.

Integrated LED and safe installation

The LED source is built in and is not designed for replacement by the user. A transformer or driver for operation from a 230 V supply is included. Installation requires isolating the circuit, preparing an accurate opening and placing electrical components without strain or heat build-up. A qualified installer should make the connection in accordance with the documentation and local rules. Service access is worth planning before purchase, because a fault in the module or driver may require removal of the complete fitting from the ceiling.