Rendl KOMBIX 3 R11788 pendant suspension set, chrome, 3×E27, 3 m cables Promo CODE - LUN18 until the end of Oct 28

Rendl KOMBIX 3 R11788 is a three-drop suspension set for lampshades, with a shared ceiling canopy and metal E27 lampholders. This chrome version pairs pale textile cables with chrome ceiling holders. It is not a lampshade: it provides the suspension assembly for a pendant light completed with separately chosen shades.

Positioning three drops around one canopy

Each cable is 3 m long. The ceiling holders let you place the drops beyond the outline of the central canopy, within the available cable length. Allow for both the section routed across the ceiling and the section hanging down to the lampholder. A three-metre cable does not therefore provide a three-metre vertical drop in every arrangement.

The canopy is 18 cm in diameter and 3 cm high. These measurements describe the ceiling base, not the shades or the overall completed light. Check the intended spacing alongside the size of your chosen shades, particularly when planning a three-point arrangement over a dining table or a table in the kitchen.

Choosing shades and light sources

Rendl lists compatible shades including ARISTA, DELI, JAKARANDA, DOUBLE 40/30 and 55/30, ASPRO 40/30 and 55/30, and specified sizes from the RON and TEMPO ranges. The suspension set does not replace the shades. Their shape and dimensions determine the final outline of the pendant, while the shared canopy connects its three hanging points.

Each E27 lampholder accepts an LED bulb rated at a maximum of 15 W. Bulbs are not included. Brightness and colour temperature depend on the light sources you select; dimming requires suitable dimmable bulbs and compatible control equipment.

Chrome details and installation

The exposed cable layout and small metal lampholders suit modern and industrial interiors. Shade selection can change the character of the completed assembly, so the canopy alone does not define the finished look. The set uses a 230 V supply. Its manual requires installation by a qualified person with the power disconnected before work begins.