Silver SpectrumLED CABINET SLI040030NW LED under-cabinet light 30 cm 3.3 W 250 lm 4000 K 12 V

SpectrumLED CABINET SLI040030NW is a slim silver linear LED light with a touch point at one end. Measuring 30 cm long, 2.9 cm wide and 1 cm high, it fits beneath a cabinet or shelf. Its integrated module draws 3.3 W and produces 250 lm of neutral 4000 K light.

Task light for cabinets and wardrobes

Catalogue applications include the space beneath kitchen cabinets and inside a wardrobe. An output of 250 lm illuminates a defined area such as part of a worktop, shelf or fitted storage, rather than serving as the room's general light. The 120° beam spreads illumination broadly instead of creating a narrow spot. A 4000 K colour temperature is neutral white, avoiding a pronounced warm cast over materials or food. CRI 80 provides standard colour rendering for everyday tasks.

Integrated LED and touch control

The LED source is built in and included, so there is no separate bulb to buy. The POINT TOUCH designation identifies the touch point in the housing end. The producer's current data sheet confirms dimming, allowing the full 250 lm output to be reduced for lower-level supplementary light. Rated module life is 17,000 hours, with 15,000 on-and-off cycles. A broad opal cover conceals the diodes and distributes light along the complete 30 cm length.

Requires a 12 V DC power supply

CABINET runs on 12 V direct current and has a nominal current of 275 mA. A power supply is not included, so a compatible 12 V DC driver must be selected before installation, with capacity for this fitting and any other modules on the circuit. Class III construction means the light operates at safety extra-low voltage provided by that external supply. The package contains the complete bar with its non-replaceable LED module; the external driver and power-distribution components must be obtained separately.

Low-profile aluminium housing

The silver aluminium body measures 300 × 29 × 10 mm and weighs 0.066 kg. Its shallow profile allows surface mounting beneath a horizontal furniture panel, while the low weight minimises the load placed on the board. IP20 defines use in a dry indoor position. The producer states an operating range from −20 to +40 °C and a two-year warranty. Work on the mains side of the external driver must be performed with power isolated. The light bar itself must never be connected directly to a 230 V supply.