A fitting you can walk on
DASAR 115 is a walkover luminaire — set horizontally into ground, paving or a terrace and rated to take a footfall. That is what separates it from an ordinary garden spot: housing and glass have to carry the load, and the seal has to hold against water standing over the fitting after rain. Hence IP67 — dust-tight and resistant to immersion, not merely to jets.
The beam can be aimed after installation
This is the feature that justifies choosing this model over a cheaper fixed recessed fitting. The GU10 holder tilts through 30° and rotates through 90° horizontally, even once the body is set in concrete. So the beam is aimed at a tree trunk, a wall or along a path without moving the housing — and when the garden is rearranged, it is a matter of lifting the cover and resetting it.
316 stainless, not ordinary stainless
The housing is grade 316 stainless steel, not the more common 304. The difference is the molybdenum: 316 tolerates chlorides — winter road salt and sea spray — where 304 starts to pit. For a fitting set into a drive that gets driven over in winter, that is not a catalogue detail. The cover is part-satinised glass.
GU10 / QPAR51 lamp chosen separately
No light source is supplied. The holder is GU10 in the QPAR51 format, maximum 35 W. The manufacturer also states a glass temperature of 110 °C at the light-emitting face — a real figure worth remembering if the fitting is going somewhere people walk barefoot. Choosing a lower-wattage lamp brings the temperature down too.
Installation
Cut-out: round, 11.5 cm across, 16.5 cm deep — those are the dimensions of the recess or sleeve, not of the fitting itself (which is 13 cm across by 16 cm deep). Supply 220–240 V, 50/60 Hz, protection class I (an earth conductor is required), impact resistance IK08 (5 joules). Net weight 0.964 kg, gross 1.177 kg. Five-year warranty.
Technical data
- Manufacturer: SLV; DASAR series; model DASAR 115; article no. 229320; EAN 4024163113366
- Type: walkover in-ground luminaire, round
- Lamp: 1 × GU10 / QPAR51, max. 35 W — not included
- Adjustment: tilt 30°, horizontal rotation 90°
- IP67; IK08 (5 J); protection class I; direct light emission
- Supply: 220–240 V, 50/60 Hz
- Material: 316 stainless steel, part-satinised glass
- Fitting dimensions: 13 cm diameter, 16 cm deep
- Cut-out: round, Ø 11.5 cm, 16.5 cm deep
- Glass temperature at the emitting face: 110 °C
- Weight: 0.964 kg net, 1.177 kg gross; 5-year warranty
Add your comment about SLV DASAR 115 Walkover Light GU10 max 35 W, 316 Stainless Steel, IP67 IK08, 30° Tilt, Ø 13 cm