Nowodvorski WHEEL I 9033 is a black pendant light with a circular plywood shade and painted-steel suspension. The shade is 30 cm wide and high, takes one replaceable E27 LED bulb up to 10 W, and hangs within a maximum overall height of 137 cm.
A circular black plywood shade
Two offset discs form a rounded volume enclosed at the sides and measuring 30 cm across. Plywood is the leading material, while the cable, canopy and structural components use painted steel. Its black finish is identified as P013 RAL 9005. The shade is also 30 cm high, giving it the proportions of a complete circle when viewed from the side. Net weight is 0.95 kg and gross packed weight is 1.26 kg, figures stated on the producer's exact catalogue card.
One replaceable E27 LED bulb
The lampholder accepts one E27 source. The producer permits only an LED bulb rated at no more than 10 W. No bulb is supplied, leaving brightness, colour temperature, beam angle and the appearance of its visible section to be selected separately. The replaceable E27 format allows those properties to be changed later without replacing the pendant. The fitting itself has no declared dimming system; any adjustment consequently requires a compatible dimmable bulb and a suitable external dimmer in the electrical installation.
Maximum overall height of 137 cm
The pendant extends up to 137 cm from the ceiling to the bottom edge of the shade. Its cable can be shortened, but the producer specifies that height modification must be performed by a qualified electrician. The circular ceiling canopy is 8 cm wide and 3 cm high. Required clearance above a table or circulation route should be decided before installation and the cable adjusted accordingly, rather than relying on the incorrect fixed ceiling-distance value of 25 cm present in the old record.
IP20, Class I and no fixing kit
WHEEL I operates at 220–230 V and 50/60 Hz and is a Class I fitting, requiring a protective earth. IP20 limits it to a dry indoor position. The pendant attaches through a mounting bracket, but the mounting kit is not included; anchors and screws must match the ceiling material and load-bearing capacity. The bulb is also excluded. Supply must be isolated before wiring, and both installation and alteration of the suspension length should be entrusted to a person with the electrical qualifications required in the installation country.
Add your comment about Black pendant light Nowodvorski WHEEL I 9033 plywood Ø30 cm E27 LED 10 W