Busbar Connector SLV 1 SYSTEM Longitudinal Rigid Black 143090

The part that joins two track lengths into one straight run

Longitudinal connector 143090 joins two lengths of SLV 1 SYSTEM single-circuit surface track into one straight line. It sits between the end faces of adjacent sections and carries both the mechanical and the electrical connection, so once assembled the whole run is fed from a single point. It is a rigid connector — it does not bend and allows no change of angle; corner pieces exist separately for changes of direction.

When you need one

Track is sold in standard lengths (usually 1 m, 2 m and 3 m) and rooms are rarely a multiple of those. A connector lets you build a run of any length: 2 m + 1 m over a kitchen worktop, 3 m + 3 m along a shop floor, and so on. The number of connectors needed is always the number of sections minus one.

Installation parameters

The part measures 6.4 × 3.5 × 1.8 cm and weighs 24 grams. It works in a 220–240 V, 50/60 Hz installation in protection class I — the track's earth conductor passes through it and must be connected along the whole run. The housing is polycarbonate in black, matched to the black version of 1 SYSTEM track. IP20 means dry rooms only.

A caution when ordering

Connectors are not universal between systems. This one belongs to single-circuit SLV 1 SYSTEM surface track — not to 3-circuit track (EUTRAC, for instance), not to recessed versions, and not to 48 V magnetic systems. Check the designation of the track you already own before buying: profiles from different makers look alike but are not interchangeable.

Specifications

• Manufacturer: SLV
• Model: 1 SYSTEM longitudinal connector, article 143090
• EAN: 4024163142656
• Type: rigid longitudinal (straight) connector
• System: SLV 1 SYSTEM single-circuit surface track
• Dimensions: 6.4 × 3.5 × 1.8 cm
• Voltage: 220–240 V, 50/60 Hz; protection class: I
• Ingress protection: IP20
• Material: polycarbonate; colour: black
• Net weight: 0.024 kg; gross: 0.026 kg
• Warranty: 5 years