Mantra DALIA 8119 white and gold LED wall light 24 W 3000 K 22 cm

Mantra DALIA 8119 is a square wall light with a white open frame in front of a gold-coloured back panel. The aluminium construction separates these two surfaces, leaving the gold visible through the central opening. When switched on, the light brings out the space between the layers.

Allow for the face and the projection

The front measures 22 × 22 cm, while the complete fitting projects 6.3 cm from its mounting surface. The smaller measurement describes depth, not the width of the visible square. Compare both dimensions with the intended position beside a doorway, furniture or another wall feature before deciding where to install it.

The white frame and gold panel remain distinct when the light is off. Manufacturer photographs show both lit and unlit states, so the design can be assessed independently of its illumination. Its simple overlapping planes suit modern and minimalist interiors where the wall light is intended to remain a visible geometric feature rather than disappear into the background.

Integrated light with a fixed specification

The built-in LED uses 24 W and produces warm-white light at 3000 K. Mantra specifies 1680 lm for the complete luminaire and 2750 lm for the light source itself. Use the luminaire figure when comparing finished fittings: the larger module figure is not the amount of light leaving the complete construction. The warm-white colour also differs from neutral-white 4000 K lighting.

This fitting is not dimmable, and the manufacturer identifies the light source as non-replaceable. There is no separate bulb to select, but changing a bulb cannot alter its colour temperature either. If adjustable brightness is part of the lighting plan, choose a different fitting.

A wall feature rather than a reading light

DALIA can provide supplementary wall lighting in a living room, bedroom, dining room, entrance hall or corridor. Its layered design highlights the fitting and adjacent wall; it should not be treated as a directional reading lamp or a worktop light. The Class I electrical construction is rated for 220–240 V and requires an appropriate protective-earth connection during installation.