NORLYS Hitra 1331WH white LED outdoor wall light 3000 K

NORLYS Hitra 1331WH is a white outdoor wall light with a shallow rectangular housing and a circular light opening underneath. Powder-coated cast aluminium in RAL 9003 is paired with clear safety glass. Its straight edges and closed upper surface give it a restrained form suited to modern, minimalist architecture.

Warm light directed below the fitting

The integrated LED module provides warm white light at 3000 K. Light is distributed downwards in a diffuse hemispherical pattern, so the area below the mounting position is the relevant starting point for a lighting plan. Possible locations include an entrance wall, the wall beside a terrace or balcony, and the part of a driveway next to the building. This is not an up-and-down wall light.

The complete luminaire delivers 1599 lm while using 17.5 W. The separate figure of 1950 lm describes the light source itself, rather than the output leaving the assembled fitting. Keeping those measurements separate helps when comparing the brightness of different outdoor wall lights. This version is not dimmable and uses on/off control.

Allow for its projection from the wall

The body measures 15 cm across, 6 cm in height and projects 20 cm from its mounting surface. A low profile therefore does not mean that it sits flush with the facade. Check that projection against the available space beside doors, walkways or railings before deciding on the mounting position. The white finish can accompany light-coloured render, while the simple outline follows the clean divisions of contemporary buildings.

Electrical installation and future maintenance

The fitting requires a 220–240 V supply. Its Class I construction requires a protective earth connection, and installation should be carried out by a qualified person. The two fixing holes are spaced 104 mm apart. IP65 protection depends on correct installation, including sealing the cable entry as specified in the instructions.

The LED source is included, so there is no ordinary screw-in bulb to select. Replacement of that source is reserved for professional service, rather than routine user relamping. The corner bracket is a separately sold accessory and should not be assumed to arrive with this version.