Pendant Light Sigma VESUVIO 3xE27 Beige Gold 70 cm 41068

Sigma VESUVIO M 41068 – three lamps beneath one 70 cm shade

VESUVIO M 41068 combines one large, calm form with a three-light arrangement. The beige shade is a broad cone measuring 70 cm in diameter and 41 cm high. Its matt outer face remains restrained from above, while the open base reveals an expansive gold interior with a decorative irregular texture. Exact-variant imagery shows three bulbs grouped centrally beneath the shared shade. The pendant therefore retains a unified silhouette while offering more scope for light output than the related single-lamp version.

Three E27 lamp holders

Model 41068 accepts three replaceable E27 LED lamps, each rated at no more than 15 W. Bulbs are not supplied, so output and colour temperature can be chosen for the setting; three matching lamps are advisable for an even result. Light leaves the open underside, covers the zone beneath the wide rim and reveals the gold texture. This configuration is useful above a larger table, island or central lounge area where a single bulb might produce an effect that is too restrained.

Proportions for a larger setting

At 70 cm across, VESUVIO M becomes a clear visual centre. Beige and gold work with timber, natural stone and warm neutral palettes, while mineral composite gives the shade a continuous sculptural surface. Maximum overall height is 140 cm. The exact dimension drawing identifies a circular canopy 10 cm in diameter and 2.5 cm high, connected by a slender cable that does not distract from the broad cone.

Model 41068 specifications

• single shade: 70 cm diameter, 41 cm high;
• 3 × E27 LED, maximum 15 W per lamp;
• replaceable bulbs not included;
• beige mineral composite with gold interior;
• painted steel suspension components;
• adjustable overall height up to 140 cm;
• ceiling canopy 10 × 2.5 cm;
• weight 2.8 kg and IP20 rating;
• two-year warranty.

Before installation, compare the shade with the intended surface and allow sufficient head clearance. Each of the three bulbs must remain within the stated rating, and wiring should be completed with the circuit isolated.