Recessed downlight SLV NUMINOS MOVE DL XL white 37.4W 4000K 1003761

SLV NUMINOS MOVE DL XL 1003761 is a round recessed LED ceiling light with a white trim and white reflector interior. Its aluminium construction leaves a visible ring measuring 19 cm across. The movable optical section lets you direct the light away from the fitting’s vertical axis.

A beam you can aim at a specific surface

This version produces neutral white light at 4000 K, with a declared luminous flux of 3800 lm and power of 37.4 W. Its 40° beam concentrates light on a selected area rather than dispersing it equally in every direction. When planning the layout, consider both ceiling height and distance to the object: the illuminated footprint becomes wider as that distance increases.

Horizontal rotation extends to 355°, with a tilting range of 30°. This allows you to highlight a picture, a shop display or a feature in a living room without relocating the ceiling opening. A CRI of 90 is relevant when viewing the colours of furnishings and displayed objects. The plain circular trim has no decorative projections, making its form appropriate for modern and minimalist interiors. The white finish avoids adding a dark outline around the opening.

Check the ceiling space before ordering

The fitting requires a round cut-out 17.5 cm in diameter and an installation depth of 13 cm. The light itself is 11.8 cm high, so its body height is not the same as the required installation space. Compare these measurements with the ceiling construction and the space allocated for the power supply. The manual requires ventilation and prohibits covering the fitting with insulating material. This is an indoor luminaire.

Driver requirements and servicing

Operation requires a suitable constant-current LED driver with an output of 1050 mA. The manual specifies a driver power rating of at least 37.4 W; the luminaire is not intended for direct connection to the mains. Have a qualified electrician select the driver and install the light. The LED light source can only be replaced by qualified service personnel, rather than by fitting an ordinary replacement bulb. For external cleaning, the manufacturer specifies a cloth lightly moistened with water, after disconnecting the power and allowing the light to cool.