Track Spotlight NANO - LVM SPOT ZOOM LED 7W 11715 Nowodvorski Promo Code 🚀- NOVO10 until the end of Sep 30

NANO - LVM SPOT ZOOM LED 7W is a spotlight made for the NANO-LVM track system. The black painted aluminium barrel, 4 cm across and 8 cm long, hangs from a flat arm below the adapter that clips into the track. A knurled ring sits on the barrel — that is what changes the beam angle.

What you need besides the fitting

The spotlight fits the NANO-LVM system and nothing else. It runs on 24 V DC in protection class III, so the track has to be fed by a 24 V DC power supply intended for that system — it cannot be wired to an ordinary 230 V circuit.

The box holds the fitting alone: track, power supply and mounting parts are bought separately. The manufacturer specifies it for indoor use only.

An adjustable beam

The ring on the outside of the barrel moves the beam between 15 and 45 degrees. The difference is plain: from two metres away the pool of light measures about half a metre across at 15°, and roughly 1.7 metres at 45°.

One fitting therefore covers two jobs. Narrowed down it picks out a single picture, shelf or display piece; opened up it lights a stretch of worktop or walkway.

How much light it gives, and what kind

The built-in LED module draws 7 W and delivers 300 lumens. That is accent light rather than room lighting — brightening a room takes several of these or a separate main source.

3000 K is warm white, and a colour rendering index above Ra 90 means colours look almost as they do in daylight; that counts over stock in a shop and over a picture. The light source is built in and cannot be replaced — the manufacturer quotes 30,000 hours, after which the whole fitting is changed.

Build and dimensions

Barrel and arm are painted aluminium, the track adapter is plastic, and everything is the same black. The fitting is 5.7 cm wide and weighs 0.13 kg, so several will sit side by side on a short run of track.