Endon Studio 76580 Copper and Black 6 Light E27 Pendant

Endon Studio 76580: an industrial six-light pendant

The Studio 76580 by Endon is an open, graphic pendant designed around six separately suspended lampholders. Black E27 holders hang from black fabric flex, while the metalwork has a copper-plated finish. There are no shades, so the chosen lamps remain a deliberate part of the composition and influence the final appearance of the fitting.

Each of the six flexes measures 1.5 metres and can be positioned at a selected height. Endon specifies an overall adjustable height of 220–1620 mm and a possible diameter of 150–3000 mm. The drops can therefore be gathered into a compact cluster or spread across a large area above a dining table, kitchen island or work surface. Plan the route and height of every drop before installation rather than treating the dimensions as a fixed circular shade.

Choose the lamps for the required effect

This fitting takes six E27 GLS lamps, each rated at a maximum of 60 W; bulbs are not supplied. It operates at 230 V, is Class I, and can be dimmed when appropriate dimmable lamps and compatible control equipment are selected. Endon suggests E27 filament lamps to complement the exposed-holder look. Its light output is not fixed: it is determined by the six separately purchased lamps, so no single lumen figure should be expected for the pendant itself.

Copper-coloured metalwork, black textile flex and the freely arranged drops suit industrial and contemporary interiors. The IP20 rating and the product’s construction are intended for indoor use. The stated weight is 1.5 kg, and Endon supplies a two-year warranty. Studio 76580 is a pendant for a planned lighting layout, not a pre-set fixture with integrated LEDs.