Honey brass pendant light Italux GELA PND-5500-6-HBR 6×G9 max. 5 W

Italux GELA PND-5500-6-HBR is a pendant light with six white glass globes arranged around a honey-brass structure. The fitting measures 56 cm long, 56 cm wide and 79 cm high, so these dimensions should be compared with the table, island or clear area beneath the chosen ceiling position before installation.

Six replaceable G9 light sources

Each globe accepts one G9 LED bulb rated at no more than 5 W. There are six light points in total, allowing matching bulbs with the same colour temperature and output to be fitted throughout. The bulbs are not included and must be purchased separately. This leaves the light colour open to the user, but the physical size of the selected G9 lamps should be checked so that they fit comfortably inside the spherical shades. Dimming is possible only when the chosen LED bulbs are dimmable and the installed control is compatible with them.

Steel structure and white glass

The frame, ceiling cup and curved arms use the finish described by the manufacturer as honey brass. White glass globes screen the direct view of the bulbs and keep the composition visually consistent when the fitting is switched off. Both catalogue images belong to this exact variant: one shows the unlit product and the other shows it with the light sources operating. The structure is designed for fixed ceiling mounting. Its 56 × 56 cm footprint helps with planning clearance from cabinets, walls and normal walking routes.

Power supply, IP20 and location

GELA operates on 220–240 V and is rated IP20. It is therefore intended for dry indoor spaces and has no water protection. The manufacturer lists living rooms, bedrooms, studies and dining areas among the possible locations. When the pendant is positioned above a table, its fixed construction height and a suitable clearance for the way the room is used must be considered. The fitting carries a two-year warranty. The circuit should be isolated before installation or connection, and the supplied instructions followed. All six bulbs should use the same socket, voltage and compatible operating characteristics.