Lumines Claro linear pendant white lacquered LED 4000 K 120 cm

The Lumines Claro 26-0000-00 is a ready-made linear pendant: a white lacquered aluminium body and a milky PMMA diffuser. The cross-section is 43 × 73 mm and the body is 1213 mm long, a little over the commercial 120 cm size. Two slim suspension wires meet a round ceiling canopy; the LED source is built in, so there is no separate strip or lamp to buy.

How it sits on the ceiling

The bar needs just over a metre of clear ceiling. The 43 mm face fits over a dining table or kitchen island without blocking the view as a bulky shade would. Suspension height comes from the 1250 × 1.2 mm wires in the box, together with a shorter ball-end wire, ceiling bracket, cable lock and nipple, so a standard hang does not need extra Claro hardware.

It is a pendant, not a recessed fitting. Packed weight is 3.24 kg, which helps judge the fixing point. The maker specifies indoor use; IP20 does not cover wet rooms.

Light and supply

Integrated Samsung LEDs run at 4000 K, a neutral white without the warmth of 2700–3000 K. Useful flux is 5400 lm in a 120° cone and total flux 6640 lm at 54 W, about 123 lm/W. A 100° beam spreads light downward rather than as a tight spot. CRI 83 and MacAdam uniformity below 4 steps suit everyday work and meals; CCT is not adjustable.

Mains supply is 220–240 V AC, 50 Hz, power factor 0.96. The luminaire is not dimmable — brightness follows the circuit switch only. Energy class E comes from EPREL label 909901. L70B50 lifetime exceeds 54 000 hours and the warranty is 5 years.

Where it belongs

A 4000 K linear bar works as general light over a table, island, desk or corridor, and in an office, study, shop or hotel circulation space. In a living room or bedroom it reads brighter and more task-like than warm sources. It does not replace a bathroom or outdoor luminaire.

Form

The unadorned rectangular profile and white lacquer suit modern, minimal interiors. The milky cover hides the LED points; when on, the housing edge becomes an even strip of light. Claro is a Lumines profile system, but this SKU is a complete luminaire, not an empty extrusion to assemble.