MiBoxer FUT025 kit: RGB LED controller 10A + 2.4 GHz remote (1 zone)

The MiBoxer FUT025 is a kit for wireless control of RGB LED strip: the FUT025 controller and the FUT098 touch remote. Both parts are paired at the factory and sold together, so all you need to add is an RGB strip and a 12 or 24 V power supply.

Control

The remote talks to the controller over 2.4 GHz radio — no Wi-Fi and no gateway involved. Range is up to 30 m. The touch ring picks the colour, while separate keys set brightness and saturation and step through 20 automatic colour-change programs. The controller remembers the last setting and returns to it when power comes back on.

Wiring

The controller uses a common-anode output: the strip connects with four wires (R, G, B and positive) to screw terminals. Each channel supplies 6 A, and the combined load must not exceed 10 A.

Pairing

Cut the power to the controller, switch it back on and press key 5 on the remote once within 3 seconds — the strip blinking twice slowly confirms the pairing. One remote drives any number of controllers, but a single controller can be paired with at most four remotes.

Specification

• Kit: FUT025 controller + FUT098 remote
• Supply voltage: DC 12–24 V
• Output: 6 A per channel, 10 A total maximum
• Common-anode output (R, G, B, +)
• Radio: RF 2.4 GHz (2400–2483.5 MHz, GFSK), 30 m range
• Remote power: 2 × AAA batteries (3 V), standby draw <20 µA
• Working temperature: -10~40°C
• Controller size: 85 × 45 × 22.5 mm, remote: 110 × 53 × 20.5 mm