Trysil 1019GR is a complete 300 cm lighting pole with two arms opening into a Y shape, each ending in a flat LED head. The pole and heads are extruded aluminium profile, powder-coated graphite (RAL 7016), with clear UV-stabilised polycarbonate diffusers.
Dimensions and installation
The arms span 118 cm in total and the heads are 24 cm wide β the space the top of the pole needs above a path or driveway. The pole weighs 23.3 kg and arrives in a 232 cm long carton, worth planning for when taking the delivery.
Fixing needs a separately sold part: mounting adapter (1259), ground anchor (180) or concrete anchor (3091). The terminals take cable up to 5 Γ 4 mmΒ² with a diameter of up to 13.6 mm and allow loop-through wiring to further poles. It is a protection class I luminaire, so an earth conductor must be connected β installation is for a qualified electrician.
How much light and what kind
Two Philips Fortimo LED modules draw 23.3 W together and deliver 3425 lm at 4000 K, a neutral white. Ledil VSM lenses spread it symmetrically around the pole (IESNA Type V), with only 0.9% of the output going upwards. The manufacturer calculated the illuminance for a 3 m mounting height β the basis for planning the spacing of further poles.
The driver runs on DALI2 with NightDim and leaves the factory programmed for full output; night-time dimming and other operating modes are set up by arrangement with Norlys. LED life to L90B10 is 100,000 h β over 90 years at 3 hours a day. The LED modules and driver are replaced by a professional service.
Durability and intended use
The luminaire is IP65, meaning dust-tight and protected against water jets, with IK10 impact resistance. A 6/10 kV surge rating protects the electronics from mains surges. The plain geometric form without ornament suits modern architecture; the pole is intended for gardens, parks, driveways and terraces.
Add your comment about Trysil 1019GR LED Lighting Pole 3 m, Double-Arm, Graphite, DALI2 NORLYS