V-TAC VT-44109 LED floodlight 100 W 8150 lm 4000 K IP65 black, SKU 23980

V-TAC VT-44109 is a flat 100 W LED floodlight in a black aluminium housing, with a glass front sealed by a silicone rubber gasket. The driver is built in and the LED module is integrated, so the floodlight connects straight to a 220–240 V supply and needs no bulb and no separate power supply.

How much light, and what kind

A flux of 8150 lm from 100 W works out at about 80 lm/W. The 110° beam spreads that light widely, so the floodlight suits a building facade, a yard, a car park or an advertising board rather than picking out a single detail. At 4000 K the light is neutral white.

According to its EPREL registration the CRI is 80 but R9 is only 3, so reds and pinks look muted under this light. Colour consistency is 6 SDCM steps, so two units mounted side by side may differ slightly in their shade of white. The flicker metric Pst is 1.0, exactly the limit EU rules allow — this is light for an area, not for a workstation. The floodlight cannot be dimmed; the manufacturer states it can work with an external motion sensor.

Installation and durability

The housing measures 253 × 225 mm and is only 29 mm thick, and the whole floodlight weighs 0.82 kg. It mounts on the bracket visible under the housing. The connection includes live, neutral and protective earth, so the installation must be earthed.

IP65 means it is dust-tight and protected against water jets from any direction, so the floodlight can run outdoors without cover. Impact resistance, however, is only IK05 — worth mounting it out of reach of a ball or an accidental knock. The manufacturer gives an operating range of -20 to +40 °C, a lifetime of 20,000 hours and more than 10,000 switching cycles; the light reaches full brightness instantly when switched on.