V-TAC VT-6129 62416 LED panel 29 W 3600 lm 4500 K 59.5 cm

V-TAC VT-6129, SKU 62416 and EAN 3800157609289, is a white square 59.5 × 59.5 cm LED panel supplied with a driver. Its current exact light-source sheet specifies 29 W, 3600 lm, neutral 4500 K light and energy class E.

Even light from a slim panel

The body measures 595 × 595 mm and is only 13 mm thick. A white aluminium frame surrounds the PMMA and PC light-distribution assembly, while a protected diagram reveals the reinforcing, reflective and diffusing layers inside. A broad 120° angle spreads illumination across a large area, supporting office, conference room, retail, corridor or other dry-interior use. Eleven protected images cover front, side and rear views, the driver, installed examples and an energy label. Corridor image 322348 communicates the installed result more clearly than the previous secondary, which repeated the front view.

29 W, 3600 lm and exact 4500 K output

The three-page product information sheet for identifier 62416 confirms 29.0 W on-mode power, 3600 lm useful flux in a 360° sphere, CRI 80 and a neutral 4500 K colour temperature. V-TAC continues to identify the series as 120 lm/W. Displacement factor is 0.96, rated life is 20,000 hours and switching endurance is 15,000 cycles. The source is energy class E and non-dimmable. These current exact figures supersede the older 3480 lm, 4000 K and class D shown in gallery material; the generic instruction giving another flux does not identify exact SKU 62416.

Driver included for dry-interior installation

The panel operates at DC 30–42 V on its LED side, and the supplied driver accepts AC 220–240 V at 50/60 Hz. Its integrated SMD LED source is not replaceable; the complete luminaire is replaced when that source reaches end of life. IP20 limits installation to dry interiors, while IK05 describes enclosure impact resistance. Normal operation is specified from -20 to +45°C. The package contains the panel and driver, so no bulb is purchased. Substrate-specific ceiling fixings are not documented, and installation must be completed with power isolated by a qualified electrician.