NORLYS Hitra 2462GB outdoor LED ceiling light, grey beige RAL 7006

NORLYS Hitra 2462GB is a square outdoor ceiling light with a circular satin-finished glass diffuser underneath. Its grey-beige RAL 7006 body is made from powder-coated cast aluminium. Straight surfaces and the contrast between square and circle suit modern, minimalist and Scandinavian architecture, without decorative arms or suspended parts.

A compact fitting for horizontal surfaces

The body measures 13 × 13 cm and is 6 cm high. Compare these dimensions with the width of your soffit or entrance ceiling before choosing its position. This is a small surface-mounted fitting, not a recessed light. The manufacturer specifies mounting on horizontal surfaces, allowing use beneath a terrace roof, balcony or gazebo, or above an entrance beside the façade.

IP65 indicates protection against dust and water jets; it does not describe a light intended for immersion. Satin-finished safety glass, an aluminium body and a silicone gasket form the outdoor construction. Maintaining the stated protection depends on installation in accordance with the instructions.

Neutral white light and DALI2/TD control

The included LED module provides a colour temperature of 4000 K. Light is directed symmetrically downwards, with a luminaire output of 1071 lm at a total power of 14.5 W. This output belongs to the assembled fitting, not the bare LED module. When planning quantities and spacing, consider mounting height and the photometric data rather than assuming one light will illuminate an entire terrace evenly.

The driver supports DALI2/TD. Choose this version for a compatible control installation; the designation does not confirm operation with any arbitrary wall dimmer. There is no separate bulb to select because the LED light source is already included.

Fixing and professional servicing

Hitra operates on 220–240 V and is a Class I fitting. Its two 5 mm fixing holes have a spacing of 63 × 112 mm; fixing plugs are not supplied. The instructions specify a cable diameter of 7–10.5 mm where it passes through the gasket. Both the LED module and control gear are replaceable by a professional service, rather than through an ordinary household bulb change.