NORLYS Lillesand 1382AL Bollard Light Aluminium LED E27 5.9W 2700K 85 cm IP55

Lillesand 1382AL is a cylindrical bollard light 85 cm tall and 12 cm in diameter, in cast aluminium powder-coated in an aluminium finish (RAL 9006). The top 14 cm is a satin PMMA diffuser that glows all the way round — the light distribution is rotationally symmetrical.

Bulb included, and the light it gives

The bollard comes with a Philips LED E27 bulb rated 5.9 W at 2700 K — a warm, slightly yellow light close to a traditional incandescent bulb. The bulb itself gives about 806 lm, and 495 lm leaves the satin diffuser: enough to mark a path or an entrance, not to light a whole yard. You can replace the bulb yourself, but only with an LED E27 bulb of A55–A60 shape. A ULOR of 41% means a good share of the light goes upward, so the diffuser is visible from a distance.

Dimming

The luminaire works with trailing-edge and leading-edge phase dimmers, and the supplied bulb is dimmable. When replacing it, choose an LED bulb marked as dimmable, otherwise brightness control will stop working.

Mounting and conditions

The base is fixed with three bolts through ø9 mm holes set 120° apart on a ø65 mm circle. Concreting and ground anchors, a concrete foundation adapter, mounting adapters and a junction box are sold separately. The terminals take cables up to 2 × 2.5 mm² and allow the supply to loop on to the next bollard. IP55 means protection against dust and water jets, IK08 describes the housing's impact resistance, and protection class II means double insulation with no earth conductor. The manufacturer intends it for gardens, private grounds and public areas.