The NORLYS Narvik II 1738GR is a graphite LED bollard, 95 cm high. Its 24 × 24 cm square base and four-sided light outlet, screened from above, define both the form of the fitting and the way light is distributed around it. The body is made of painted cast aluminium; a transparent PMMA diffuser and silicone gasket complete the construction.
The integrated LED is rated at 22.2 W, produces 1475 lm and has a neutral 4000 K colour temperature. The fitting operates on 230 V, supports DALI-2 control, and is specified with IP65 protection and IK10 impact resistance. These are useful installation parameters when planning an exterior lighting circuit and its control method.
Dimensions and fixing
The 95 cm height should be compared with the width of the path, driveway or entrance area to be outlined with light. Fixing uses six oval 10 × 15 mm holes, spaced every 60° on a 172 mm diameter. NORLYS notes that other accessories must be purchased separately.
Light around the property
Narvik II has an integrated light source, so no separate bulb is selected. The four-sided outlet directs light around the bollard, while 4000 K gives a neutral light colour. The catalogue assigns this model to outdoor and garden use, terraces, driveways and streets, as well as hotel and restaurant projects.
Finish and form
The graphite RAL 7016 finish and restrained square silhouette suit contemporary architecture. Before choosing the bollard, check the intended layout of fittings and the available footprint for its 24 × 24 cm base.
Add your comment about NORLYS Narvik II 1738GR Graphite LED Bollard 95 cm 4000 K