NORLYS TRYSIL 1000BL twin-arm garden and park light, 263 cm, black RAL 9005

NORLYS TRYSIL 1000BL is a twin-arm garden light with a rectangular pole and two flat heads extending outwards. Its extruded aluminium body is powder-coated black in RAL 9005. Angular branches replace the decorative roof of a traditional lantern, giving the light a distinctly modern architectural form.

Allow space for both arms

The overall height is approximately 263 cm, with a span of 118 cm and a dimension of 24 cm in the other direction. The installation drawing gives the more precise height of 2627 mm; these figures describe the same size, not separate versions. Check the space above the pole and the clearance around its arms before positioning it beside trees, a facade or a pedestrian route.

The manufacturer identifies gardens, private grounds and other architectural outdoor spaces as its applications. Its height and form can also be considered for a park or the grounds of a hotel or restaurant. Spacing between poles still requires a lighting plan. A lumen figure on its own does not establish the area that one pole will illuminate.

Warm light with phase-cut dimming

Four LED modules operate with an electronic power supply. The complete luminaire consumes 25 W and delivers 2433 lm. The separately stated 3976 lm refers to the light sources themselves, rather than the output leaving the finished luminaire. Keep that distinction in mind when comparing brightness with other fittings.

This version provides warm 3000 K light with a diffuse distribution directed mainly downwards. It supports Trailing Edge and Leading Edge phase-cut dimming, rather than DALI control. The manufacturer specifies professional servicing for replacement of the LED modules and control gear; this is not a fitting intended for a routine household bulb change.

Diffusers and installation preparation

The transparent textured diffusers are made from UV-stabilised polycarbonate. The construction includes a silicone gasket and carries IP65 and IK10 ratings. Installation and electrical connection must be carried out by a suitably qualified person following the instructions. Additional mounting accessories are purchased separately and must be selected for the intended site, rather than assumed to be included with the light.