Norlys Trysil 1078GR graphite LED garden pole light, 350 cm, 3000 K, DALI2

The Norlys Trysil 1078GR is a garden pole light with a single LED head carried on an angled arm. Its aluminium profile is powder-coated in graphite RAL 7016, while the transparent cover is made from UV-stabilised polycarbonate. Straight surfaces and the absence of ornamental details give it a modern, minimalist architectural form.

Planning for a 3.5-metre pole

The light measures 350 cm high, 71 cm long and 24 cm wide. This is a full-height pole light rather than a low bollard for a flowerbed edge. Consider both its height and the projection of the head when choosing a position, particularly near trees or other landscape features. Compare these dimensions with the intended installation area before specifying the layout.

Norlys identifies gardens, private grounds and architectural lighting as intended uses. Open park areas, driveways and the surroundings of a terrace are suitable planning contexts, subject to an appropriate lighting layout. The number and spacing of poles must be established for the actual site. IP65 protection and IK10 impact resistance are documented for this model.

Warm-white output and DALI2 control

The integrated LED module produces 3000 K light. The complete luminaire delivers 1638 lm at 12.2 W; the light source itself is rated at 1691 lm. These are distinct figures, not interchangeable brightness specifications. Its Ledil VSM lens provides an IESNA Type V distribution. Use the manufacturer's photometric files to establish spacing and coverage rather than estimating the illuminated area from pole height alone.

The 1078GR version supports DALI2 / NightDim. The driver is programmed to maximum current, with further parameters configured by agreement with Norlys. Choosing the control arrangement is therefore part of the electrical design, not simply a matter of adding an arbitrary dimmer.

Mounting components and servicing

The LED module and driver are part of the luminaire. Mounting adapter 1259, ground anchor 180 and concreting anchor 3091 are sold separately and should be selected for the intended fixing arrangement. Installation and replacement of the LED source or control gear must be carried out by qualified professionals following the manufacturer's documentation.