Mora 6466CS Twin-Arm LED Post-Top Light 3000K DALI Corten Steel for Ø60 Pole NORLYS

The Mora 6466CS is a twin-arm post-top luminaire: two cylindrical heads, 15 cm in diameter and 27 cm tall, set at the ends of an 85 cm horizontal beam. It is made from extruded aluminium profile, powder-coated in corten steel colour, a rusty brown. Light leaves downwards through lenses of clear safety glass.

Mounting on the pole

The luminaire slides onto a pole with a Ø60 mm spigot; the pole and the 3070 reducer are sold separately. Power comes through a 6.5 m H05VV-F 5G1 cable, connected inside the pole in a suitably sized junction box. The luminaire weighs 8.23 kg and has a side area of 0.12 m² — the figure a pole is selected on for wind load. It is a protection class I design and needs an earth conductor.

What light it gives

The luminaire draws 33.9 W and delivers 3229 lm at 3000 K, a warm white. Each head emits a symmetrical 30° beam downwards, with ULOR 0%: nothing goes above the fitting. The manufacturer calculated the photometry for a 6 m mounting height. Colour consistency of SDCM 1 means successive luminaires in a row shine in an identical shade, and colour rendering is Ra 80.

Control, service and durability

The driver supports DALI-2 and NightDim; it leaves the factory set to maximum current, and dimming requires a DALI controller. The LED module and driver are replaced by a professional service — the manufacturer stocks them as separate spare parts, as well as a glass kit. The manufacturer rates the LED at over 60,000 h (L90B10) and the driver at 100,000 h. IP65 means dust-tight and protected against water jets, IK08 covers impact resistance, and the surge withstand is 6/10 kV.