Outdoor wall light NORLYS Lillehammer 5030WH white RAL 9003 LED 7.3 W 4000 K

NORLYS Lillehammer 5030WH is an outdoor wall light that draws two narrow lines of light across a façade, one upward and one downward. Its rectangular powder-coated cast-aluminium body is painted white, RAL 9003. The optical openings sit at the top and bottom, leaving the front and side faces visually restrained.

A precise accent rather than broad illumination

Both beams have a 4° angle in this version. That distribution is the key purchasing distinction: the fitting creates a concentrated architectural feature on a wall rather than spreading light across the surrounding area. Its intended role is to highlight wall surfaces and façades. It should not be treated as a substitute for a wide-beam light illuminating an entire terrace.

Two LED modules are included and produce neutral-white 4000 K light. The complete fitting consumes 7.3 W. NORLYS distinguishes the light-source output of 1069 lm from the luminaire output of 31 lm. The latter figure, together with the narrow beam, is the relevant guide to the final lighting effect; the two outputs are not interchangeable. Brightness is controlled by trailing-edge phase dimming, so the chosen control needs to support that method.

Size and position on the wall

The installation drawing shows a height of 18.5 cm, width of 8 cm and depth of 11 cm. Before deciding on a mounting position, compare these dimensions with the available space and consider where both light lines will fall on the façade. Plain surfaces and straight edges suit modern architecture. The fitting can provide decorative wall accents on a house, hotel or restaurant exterior, or beside a balcony or terrace, while retaining its focused architectural role.

Installation and future servicing

The light has an IP65 rating and uses a 220–240 V supply. Mounting requires two 5 mm holes spaced 45 × 130 mm apart. Installation should be carried out by a qualified professional following the supplied instructions. Both the LED modules and control gear are replaceable by professional service personnel; this is not a conventional fitting for user replacement of an ordinary light bulb.