Dimmer Kit s.luce Smart-Dim-Set 12/24V with Remote Control, White

The white s.luce Smart-Dim-Set 12/24 V provides radio-controlled switching and continuous dimming for compatible low-voltage lighting. It pairs an LED controller with a round remote control held in a square wall mount. Variant 198034 has a white plastic housing; it is a lighting control accessory, not a luminaire or light source.

A rotary control that can leave the wall

Turn the dial to adjust brightness. The magnetic wall holder gives the control a fixed place, while allowing the circular part to be removed and used as a handheld remote. These are two ways of operating the same lighting, rather than a choice between a permanently fixed control and a portable-only device.

The manufacturer describes control of a single luminaire or a lighting group, with operation from a sofa, bed or dining table. This makes the set relevant when planning compatible lighting in living rooms, bedrooms and dining rooms. Its memory function retains the last brightness setting.

Match the low-voltage circuit

Communication uses 2.4 GHz radio, with a manufacturer-stated range of up to approximately 30 m. A smart-home system is not required for this operation. The set adjusts the connected lighting rather than producing light itself, so the resulting illumination depends on the light sources connected to it.

The 12/24 V designation identifies the low-voltage version. The controller pictured in the official gallery is marked with a DC 12–24 V input and a maximum output current of 6 A. Compare these ratings with the intended LED circuit before choosing the set. This is not a controller for direct connection to a 230 V supply.

Panel size and appearance

The stated panel dimensions are 8.6 × 8.6 × 0.9 cm. A square plate surrounding a central circular dial gives it a restrained, minimalist appearance suited to modern interiors. Use these measurements to compare the panel with the available wall space before deciding where to position the holder.