Lighting Pole TRYSIL NORLYS 1070BL Black 300 cm LED 3000K DALI2

TRYSIL 1070BL is a complete lighting pole: the column and the luminaire form one 300 cm unit with a single arm reaching 71 cm to the side. The profile is extruded aluminium powder-coated in RAL 9005 black, the diffuser clear UV-stabilised polycarbonate.

What is in the box and what you have to buy separately

The pole arrives as one product with the LED module and driver already fitted — it is not assembled from a separate head and a separate mast. Norlys states plainly that the remaining accessories are sold separately: the mounting adapter (index 1259), the ground anchor (180) and the concrete-set anchor (3091), so the method of setting it in the ground has to be ordered together with the pole.

The luminaire weighs 19.2 kg net and 21.4 kg gross, and the carton measures 44 x 38 x 232 cm — that is the length the delivery has to handle.

How it lights

The LED module draws 12.2 W and delivers 1594 lm at 3000 K, meaning warm light with a slightly yellow cast. The distribution comes from a Ledil SCL lens with an IESNA type II / III characteristic — the light is thrown along the run rather than evenly all around, so the poles are set in a line along a driveway or a path.

The BUG rating is B1-U1-G1, so a negligible share of the light goes upwards and sideways, and colour rendering is Ra 70 — enough to tell colours apart on a footpath.

Control and wiring

The driver supports DALI2 and a NightDim mode — an automatic power reduction during the night hours, which needs no central control system. The terminals take conductors up to 5 x 4 mm², and looping the next luminaire through takes up to 5 x 2.5 mm².

The gland accepts a round-sheathed cable up to 13.6 mm in diameter, worth checking if the cable is already buried. The luminaire is protection class I, so the installation has to bring an earth conductor.

Build and resistance

IP65 means full protection against dust and against water jets, and IK10 is the highest impact resistance in the standard — a pole stands where people and machinery can reach it. The polycarbonate diffuser is UV-stabilised, so it does not yellow in sunlight at the rate of ordinary plastic.

The LED module and the control gear are replaceable by a professional service, and the manufacturer lists a service kit — a failure means replacing a part rather than the whole pole.