Lillehammer 2283CS Rust-Colored Outdoor Wall Sconce with LED, NORLYS

NORLYS Lillehammer 2283CS is an outdoor LED wall light with a plain rectangular body. The CS designation identifies the Corten-steel colour finish, not the housing material. The body is powder-coated aluminium, with clear safety glass protecting the light source. The glazing is transparent rather than opal, a distinction to consider when comparing versions.

A narrow up-and-down lighting effect

The 2283 variant directs light upwards and downwards at an angle of 4° in each direction. It is intended to illuminate wall surfaces and architectural features. Account for the narrow distribution when choosing positions: its light pattern is not equivalent to a wide-beam fixture intended to provide general illumination around a building.

The 4000 K LED produces neutral white light. NORLYS distinguishes the LED module's 1008 lm output from the complete luminaire's 31 lm output. For assessing the effect on a wall, use the luminaire figure together with the distribution data. The larger source figure alone does not describe how much light this particular optical arrangement delivers.

Size, finish and outdoor installation

The stated dimensions are 18.5 × 11 × 8 cm. Compare the housing outline with the available wall space and cable position before installation. Straight edges and an unadorned front suit modern, minimalist and Scandinavian architecture. Its rust-brown finish also remains a visible colour accent when the light is switched off.

The fixture is intended for outdoor use and is rated IP65. Its construction includes a silicone seal and an EPDM cable gland. Maintaining that protection depends on installation in accordance with the instructions; the rating does not remove the need for a correctly fitted cable and electrical connection.

Power, control and servicing

The integrated LED module works with an electronic DALI/TD driver and DALI2 control. Total luminaire power consumption is 7.3 W, with a 220–240 V supply. Installation and any replacement of the LED module or control gear must be carried out by a suitably qualified professional. This is not a wall light with an ordinary screw-in bulb for the user to replace.