Lillehammer 2284AL Light Grey LED NORLYS Outdoor Wall Sconce

NORLYS Lillehammer 2284AL is an outdoor wall light designed to draw a narrow accent on a façade. Its rectangular cast-aluminium body has a powder-coated light grey finish, RAL 9006, and a clear safety-glass optical cover. Unbroken surfaces and the absence of decorative arms give it a restrained Scandinavian, minimalist appearance.

A defined downward beam

This particular version sends light downwards only, with a 4° beam. The distribution matters when choosing between Lillehammer fittings: a similar housing does not mean the same lighting effect. The integrated LED provides neutral-white 4000 K light for highlighting a portion of wall rather than broadly lighting the surrounding area.

The complete luminaire delivers 15 lm. The separate 504 lm figure refers to the LED source, not to the light leaving the fitting. On a terrace or balcony façade, this makes it an architectural accent rather than a substitute for general lighting on steps or access routes. The stated ULOR of 0% means that no luminous flux is emitted upwards.

Plan the position on the façade

The housing measures 18.5 × 11 × 8 cm. Compare those dimensions with the available wall space and plan where the narrow beam should fall before installation. The light grey finish remains part of the daytime appearance; this variant does not have a patinated finish.

IP65 protection and an IK08 impact rating are specified for the fitting. Its construction includes a silicone gasket and an EPDM cable gland. Mounting uses two 5 mm holes with a spacing of 45 × 130 mm.

DALI2 control and professional servicing

The integrated LED and electronic driver are controlled through DALI2, so the control arrangement must suit that system. Total fitting consumption is 4.5 W, with a 220–240 V supply. Installation and replacement of the LED module or control gear require a qualified professional; there is no conventional screw-in bulb to replace.