NORLYS Nora 2483BL is a black outdoor wall light with a square face and a shallow, powder-coated cast-aluminium body. The BL version has a RAL 9005 finish and clear safety glass. Two LED modules send diffused light upwards and downwards, making the wall area above and below the fitting part of the placement decision.
A small fitting that lights the wall
The body measures 13 × 13 × 5 cm. Its square face occupies a small section of the facade, while the 5 cm depth tells you how far it projects from the mounting surface. Compare that projection with nearby door frames, door movement and other wall-mounted elements before installation.
Nora is intended for illuminating walls and facades. It can be mounted on a terrace or balcony wall, or above an entrance, where light in both directions is preferable to a solely downward beam. The plain geometric body, without ornamental arms, supports modern, minimalist and Scandinavian architectural schemes.
Warm white light, with a choice of power settings
The LED sources and electronic driver are included; this is not a fitting for a conventional screw-in bulb. Its 2700 K colour temperature produces warm white light. The datasheet specifies a maximum of 15 W and 1043 lm of luminaire output, but the factory power setting is 10.9 W. For that setting with clear glass, the installation manual gives 785 lm. The maximum figures therefore do not describe the setting as supplied.
Power is selected using a switch on the driver, with the fitting switched off. Leading-edge and trailing-edge phase dimming are also supported. Any lighting control should be selected with that dimming method in mind.
Mounting and servicing
The light operates at 220–240 V and is Class I, requiring a protective earth connection. The manufacturer specifies two 5 mm fixing holes with 63 × 112 mm spacing. Mounting plugs are not included.
IP65 protection depends on correct installation. The manual specifies a round cable 7–10.5 mm in diameter and warns against damaging the silicone seal with tools. Installation and replacement of the LED modules or driver must be carried out by an appropriately qualified professional.
