NORLYS Lillehammer 2296CB is an outdoor LED wall light with a copper-brown finish. Its rectangular aluminium body has a restrained outline and a light opening on the upper surface. CB identifies the finish: the housing is not made of copper.
An upward accent for a wall
This version directs light upwards, making the vertical surface above the fitting the focus of the installation. Choose it for a facade accent rather than as a substitute for a downward-facing light over a walking route. The 2700 K colour temperature produces warm white light. Output from the complete luminaire is 108 lm, whereas the manufacturer's 504 lm figure refers to the LED source itself. The complete-fitting figure is the useful comparison when assessing the brightness of different wall lights.
The simple block-shaped housing suits modern and minimalist architecture without introducing decorative arms or a lantern frame. On a terrace or balcony wall it can provide an architectural accent; illumination of the floor and access route should be considered separately because of the upward distribution.
Allow space for the housing and connection
The body measures 18.5 × 11 × 8 cm. Compare those dimensions with the available wall area and cable position before selecting the mounting point. NORLYS specifies two 5 mm fixing holes with 45 × 130 mm spacing. The fitting carries IP65 ingress protection and an IK08 impact rating. Correct installation remains necessary to maintain the stated protection.
Integrated LED and professional servicing
The complete fitting consumes 4 W and operates on 220–240 V. There is no separate lamp bulb to select for its integrated LED source. Replacement of the source and control gear is reserved for professional servicing. The light is dimmable; control compatibility should be checked against the installation documentation before choosing a dimmer. As a class I fitting it requires a correctly connected protective conductor and installation by a suitably qualified person.
