NORLYS Lillehammer DC1587CB outdoor LED wall light, copper brown, 24 V DC

NORLYS Lillehammer DC1587CB is an outdoor LED wall light with a single upward beam. Its rectangular body is made from powder-coated cast aluminium in copper brown RAL 8004. The colour describes the coating: this is not a copper-bodied fitting.

A defined accent above the mounting point

The 60° beam highlights the wall above the light. With a complete luminaire output of 115 lm, this version should be planned as architectural accent lighting rather than the sole light source for the area around a building. Consider the available facade surface above each proposed mounting position. This variant does not provide a downward beam to illuminate the route beneath it.

The LED module uses 3.6 W and produces warm-white light at 3000 K. The separate 532 lm figure for the light source is not the output delivered by the complete fitting. A plain, geometric body without ornamental arms suits modern and minimalist facade designs, while the copper-brown coating distinguishes this finish from black or graphite versions in the same family.

Check the wall space before installation

The fitting measures 18.5 × 11 × 8 cm. Compare those dimensions with the available wall area and the intended cable route before choosing its position. Wall fixing uses two 5 mm holes on a 45 × 130 mm spacing. Clear safety glass covers the optics, with a silicone gasket and EPDM cable gland forming part of the construction. Its IP65 rating supports outdoor use, provided installation follows the manufacturer's instructions.

Plan a separate 24 V supply

DC1587CB requires an external constant-voltage power supply delivering 24 V DC; it must not be connected directly to 230 V mains. The LED module supports dimming, but the supply and control arrangement need to be selected as part of the installation design. Installation and any later replacement of the LED light source should be carried out by an appropriately qualified professional.