NORLYS Sol 4047AL is a round outdoor ceiling light with an aluminium housing finished in RAL 9006 and clear safety glass underneath. Its cylindrical body measures 20 cm across and projects 11 cm from the mounting surface. Before choosing a position, check both the available ceiling area and the clearance needed for any door opening beneath the light.
Warm light directed downwards
The built-in LED module produces warm white light at 3000 K. The complete luminaire delivers 1924 lm, while the manufacturer rates the light source itself at 2200 lm. Use the complete-luminaire figure when comparing finished fittings rather than treating the higher module output as delivered light. A symmetrical downward distribution lights the area below the ceiling instead of directing the beam upwards.
Total power consumption is 19.3 W. This version uses DALI2 control, so brightness adjustment needs to be planned around a compatible control installation. Compatibility with an arbitrary wall dimmer should not be assumed.
Ceiling lighting for covered outdoor spaces
The IP65 ceiling fitting can be used on a covered terrace or balcony, or inside a gazebo. Its plain cylinder and light grey finish suit modern, restrained architecture without decorative arms or a suspended shade. For an installation with several fittings, compare the mounting height and required coverage with the manufacturer's photometric information. Lumen output alone does not establish the illuminance that will reach a particular part of the floor, so it cannot by itself determine spacing.
Connection and future servicing
The manufacturer specifies two fixing points spaced 100 mm apart and a round-sheathed cable with an outside diameter of 7–10.5 mm. Installation must be carried out by a qualified electrician following the supplied instructions. The LED module and electronic driver are included. Both the light source and control gear can be replaced by a professional service; this is not a fitting intended for routine user replacement of a screw-in bulb.
