NORLYS Sol 4047BL is an outdoor LED ceiling light with a black cylindrical body and a clear protective glass cover. Its aluminium housing is powder-coated in RAL 9005. The plain circular form suits modern, minimalist architecture where the fitting should remain a distinct but restrained part of the ceiling.
Allowing space beneath the ceiling
The light measures 20 cm in diameter and 11 cm in height. It attaches directly to the ceiling rather than hanging from a cable. Before choosing its position, compare these dimensions with the available space and check the route for the electrical supply. Downward illumination makes it suitable for roofed terraces, balconies, gazebos and entrance areas with an overhead mounting surface.
IP65 provides protection against dust ingress and water jets. It does not permit immersion. Maintaining that protection also depends on correct installation and handling the seals as specified in the manufacturer's instructions.
Warm light with DALI2 control
The LED module and electronic driver are included. This version produces warm 3000 K light with a symmetrical downward distribution. The complete fitting delivers 1924 lm, distinct from the LED source's 2200 lm. When comparing finished ceiling lights, use the output of the whole fitting rather than the module alone.
Total power consumption is 19.3 W, while the LED module is rated at 16.8 W. Control uses the DALI2 protocol. If brightness adjustment is part of the project, plan a compatible control installation rather than assuming that any conventional wall dimmer will work.
Connection and later servicing
Sol requires a 220–240 V AC supply and the protective earth connection appropriate to electrical class I. Two mounting holes are spaced 100 mm apart. Installation must be carried out by a suitably qualified person. Both the LED module and control gear can be replaced by a professional service; this is not a fitting with a screw-in bulb intended for the user to replace.
