Outdoor Wall Light NORLYS Lillehammer 1582CS corten LED 4 W 3000 K 60° downlight

Lillehammer 1582CS is an outdoor wall light shaped as a slim, upright box that shines downwards only, in a 60° cone. The cast-aluminium body is powder-coated in a corten colour close to RAL 8011, and the light leaves through a pane of transparent safety glass.

What light it gives

The 2.8 W Cree LED module produces 504 lm, 114 lm leave the fitting, and the whole light draws 4 W. The 60° optic brightens the wall below the light with a broader pool – accent lighting that marks an entrance or a section of façade, but does not replace the main light for a terrace. ULOR is 0% and the BUG rating B0-U0-G0, so nothing shines into the sky.

3000 K is a warm white, CRI is 80, and the SDCM3 tolerance means several lights on one wall glow in the same shade. Flicker Pst LM ≤1 and stroboscopic effect SVM ≤0.4 mean no flicker visible to the eye. Norlys states L80 above 102,000 h and L90 above 52,600 h.

Dimming and service

The fitting has a Philips Xitanium TE driver and can be phase-dimmed with a trailing-edge (TE) dimmer only; a leading-edge dimmer made for incandescent lamps is not intended for it. Both the LED module and the driver are replaced by a professional service – Norlys offers the ZS1582zx0016 repair kit for this.

Dimensions, mounting and finish

The light is 18.5 cm high and 8 cm wide and projects 11 cm from the wall; it weighs 1.6 kg. It is fixed through two ø5 mm holes spaced 45 × 130 mm. The terminals take cables up to 3 × 2.5 mm² and allow loop-through to the next fitting (up to 3 × 1.5 mm²); the cable entry takes round cable of ø7–10.5 mm. It is protection class I, so the circuit needs a protective earth.

IP65 allows mounting on a wall without a canopy, IK08 protects it against accidental knocks, and the operating range is −20…+45 °C. The corten colour is a powder coat on aluminium, not corten steel – the housing does not rust and leaves no rust streaks on the façade.