SLV NUMINOS PD PHASE S LED pendant light white/black 8 W 3000 K 24° 1004158

SLV NUMINOS PD PHASE S 1004158 is an LED pendant with a narrow cylindrical body in matt white and a black surround to its recessed optic. The housing uses aluminium and polycarbonate, with a round ceiling canopy and a single suspension completing the restrained silhouette. This version pairs warm white 3000 K light with a focused 24° beam rather than the broad spread of a large shade.

A focused beam over a selected surface

The light output is 1050 lm at a rated power of 8 W. Its 24° beam directs light towards a limited area below the fitting. When planning lighting over a dining table or kitchen island, consider both the suspension height and the spacing between fittings. One narrow beam should not be treated as even illumination across an entire worktop or as general lighting for the whole room.

A colour temperature of 3000 K gives warm white light, while CRI 90 describes the colour rendering of illuminated objects. This combination can be used for accent lighting in selected areas of living rooms, dining rooms, restaurants, hotels and shops. Larger surfaces need a lighting layout that accounts for the beam distribution, rather than a decision based on lumens alone.

Body size and suspension length

The cylinder measures 6.5 cm in diameter and 16.2 cm high. The ceiling canopy is 10.3 cm in diameter and the pendant cable is 250 cm long. The installation manual allows an electrician to shorten the cable during fitting, so the position can be matched to the ceiling height and the surface below. Its matt finish and unbranched shape suit modern and minimalist interiors.

Controls and LED servicing

This PHASE version works with a compatible trailing-edge dimmer, not DALI controls. Check the dimmer's compatibility and minimum load when specifying the installation. Ceiling mounting requires a protective earth connection. The integrated LED light source and control gear may only be replaced by a qualified professional. Before cleaning, disconnect the power and allow the fitting to cool; clean exterior surfaces with a cloth slightly moistened with water.