SLV PHELIA 10 E27 pendant light, black/gold, Ø13 cm, 1002951

SLV PHELIA 10 is a slender aluminium pendant with a black exterior and a gold-coloured interior visible through the open underside. Version 1002951 has one E27 socket and a 13 cm shade diameter. It is the narrow pendant in this selection, not one of the larger shades offered within the PHELIA family.

Plan around the shade and suspension separately

The body is 25.5 cm high, while the pendant cable is 200 cm long. These measurements describe different parts rather than alternative overall heights. When deciding where the lower rim will sit, allow for both the shade and its suspension and compare that position with your ceiling height and furniture.

The installation instructions permit shortening the cable during fitting. This is an electrician's installation adjustment, not an everyday height control. A 13 cm shade can be considered over a small table, or several separately purchased pendants can be arranged along a dining table or kitchen island. Check the intended spacing and ceiling connection positions before ordering.

A replaceable bulb, purchased separately

No light source is included. The single E27 socket accepts a suitable bulb with a maximum power of 23 W. Brightness and colour temperature therefore depend on your chosen bulb; the black and gold finish does not specify the colour of the emitted light. Illuminated photographs show the appearance of the fitting but do not indicate that their pictured bulb comes in the package.

Because the shade is open underneath, its gold interior and the bulb remain visible from below. Consider the bulb's appearance within this narrow shade as well as its electrical specification.

Simple form and fixed ceiling installation

An elongated neck, conical shade and round ceiling canopy give PHELIA 10 a restrained, modern outline without decorative arms. Its compact width suits modern and minimalist furnishing schemes. It can also be considered as a bedside pendant above a nightstand, provided the chosen hanging position does not obstruct access to the bed.

The fitting requires fixed surface mounting on the ceiling and a protective earth connection. A qualified electrician must carry out electrical work, including any cable shortening. Before cleaning, disconnect the power and allow the fitting to cool. The manual specifies cleaning the exterior only with a cloth slightly moistened with water.