Item 23125 is a red textile belt from V-TAC's Fabric Belt series, supplied as a 10 m roll. The belt is not a luminaire itself — it acts as both the load-bearing support and the conductor that carries 48 V DC power to the luminaires from the same series once they are clipped onto it.
What's in the roll and what to add
The 10 m roll comes with scissors for cutting the belt to length, plus two screwdrivers and two lock openers used to fix luminaires onto the belt. The Fabric Belt LED luminaires themselves, a 48 V DC driver (100 W), and one belt-end fitting — a surface canopy, a recessed canopy or a recessed wire connector — are sold separately and are not part of this set.
How it goes together
The belt is cut on site to the length needed, and luminaires click onto it using the included lock opener. V-TAC calls for a manual tension check before hanging a luminaire and a mechanical one after it is attached. The driver connects to the belt, and only the driver is wired to the 230 V mains — the belt itself must never be connected directly to mains power, and installation is meant for a qualified electrician.
Operating conditions and warranty
V-TAC states an operating range of -20°C to +45°C and limits the system to indoor use. The belt carries V-TAC's 3-year warranty, and CE, EMC and RoHS certification confirm it meets EU safety and electromagnetic-compatibility requirements.
