SLV SIGHT MOVE DALI 1004692 is a black linear LED luminaire for a three-phase track system. Its aluminium housing contains PMMA optics, while the tilting head lets you change the direction of the light without repositioning the track itself. This version has a fixed colour temperature of 4000 K and DALI 2 control.
Beam spread and head movement
The beam angle is 75°, whereas 120° describes the vertical tilting range. These figures serve different purposes: one describes light distribution, the other the head's mechanical movement. When planning illumination for a display or wall, consider both rather than treating the movement range as the width of the light beam.
The integrated LED operates at 26 W and provides 3100 lm. Neutral white light at 4000 K and a CRI of 90 are useful comparison points when lighting objects and their colours. The colour temperature cannot be switched. DALI 2 dimming changes brightness, not light colour, and requires an installation that supports the relevant control system.
Track compatibility and available space
The fitting measures 45 cm long, 5.6 cm wide and 10.5 cm high. Compare these dimensions with the space around your track, allowing room for the head to tilt. The instructions identify the SLV/Eutrac three-phase system and S-TRACK DALI. This is not a standalone ceiling fitting for direct screw mounting to the ceiling.
Installation requires disconnecting the complete system from its power supply and observing the track's permitted mechanical load. Both the LED light source and control gear may be replaced only by a professional, rather than by a user changing a conventional bulb.
A linear fitting for indoor schemes
The rectangular body, black finish and segmented optics support a modern, minimalist appearance. SLV specifies indoor use, including accent lighting in commercial and public areas. For a shop or internal circulation area, choose the number and orientation of fittings to suit the actual lighting plan. Clean only the external surfaces with a cloth slightly moistened with water, after disconnecting the power and allowing the fitting to cool.
