V-TAC 13W LED pendant luminaire black VT-7829 4000K 1500lm

V-TAC VT-7829, SKU 10075, is a black LED pendant with a single vertical loop and rounded ends. A pale illuminated surface follows the inside of the frame, leaving the centre open. A slender suspension and cylindrical ceiling canopy complete the design without a conventional lampshade.

Neutral white light from an integrated source

The integrated SMD LED module has a power rating of 13 W and a declared luminous flux of 1500 lm. There is no screw-base bulb to select, since the light source forms part of the fitting. Its 4000 K colour temperature gives neutral white light. When comparing visually similar versions, check the colour temperature as well as the black body finish.

The stated beam angle is 120°, so this is not a narrow spotlight intended to pick out a small patch of a surface. The fitting is not dimmable: do not plan to adjust its brightness with an ordinary lighting dimmer. The lumen figure alone does not establish the illumination of an entire room, which also depends on where the lights are positioned.

Allow for the full suspended height

The dimensional drawing shows 153 cm from the top of the canopy to the bottom of the fitting. This is the complete suspended assembly, not the height of the illuminated loop alone. Compare it with your ceiling height and the space needed beneath the lamp before deciding on its location. This matters particularly where people will walk underneath. The 10 cm dimension on the drawing applies to the upper canopy.

A defined outline for modern interiors

The black frame and restrained geometry support a modern, minimalist style. The documentation identifies living rooms, bedrooms, hotels and corridors as applications. In a hallway or circulation area, adequate clearance beneath the pendant should guide placement rather than appearance alone.

Connection to a 220–240 V, 50/60 Hz supply should be carried out by a qualified electrician with the power switched off. Before cleaning, disconnect the fitting and let it cool. Keep moisture away from electrical parts and wiring connections.