Gea Luce GFA1121C is a linear recessed fitting with ten LED light points arranged in a single row. Its aluminium construction combines a satin-white finish with a glossy black anti-glare optical cover. The visible face is a narrow rectangle with individually divided cells, rather than a single circular spotlight.
Check the cut-out separately from the frame
The fitting measures 280 mm long, 45 mm wide and 49 mm high. Its ceiling cut-out is 273 × 37 mm, so the outside dimensions must not be used as the cutting template. Compare both measurements before preparing the ceiling, particularly when replacing an existing fitting.
A power supply is included but is separate from the luminaire body. Space above the ceiling must therefore accommodate that component as well. The assembly drawing shows a power-supply enclosure measuring 91 × 35 × 25 mm; the fitting's height alone does not describe the complete installation space.
Warm, directed light with on/off control
The integrated LED module is included, so there are no separate bulbs to select for this fitting. Power is 20 W, and the manufacturer specifies a luminous flux of 1600 lm. A colour temperature of 3000 K gives warm-white light, while the 30° beam directs it towards a selected area instead of spreading it broadly throughout the room.
GFA1121C is not dimmable: operation is on/off only. Allow for this when planning a circuit alongside dimmable fittings. The mains input is 220–240 V AC at 50/60 Hz.
A linear detail for contemporary ceilings
The straight geometry and contrast between the white frame and black optics suit modern, minimalist interiors. Use it as a directional part of a living-room, entrance-hall or corridor lighting scheme, with quantities and spacing determined by the lighting design. It is intended for recessed indoor installation. A qualified installer should carry out the work with the mains supply disconnected.
Add your comment about GFA1121C Recessed Light, White, Gea Luce