LED lighting set LUMINES SILEDA 3 m 24 V 60 W 2300 K IP68 – anodised silver

LUMINES SILEDA 22-0101-78 is a 3 m linear LED lighting set built around a silver-anodised aluminium profile. Unlike an empty mounting channel, it already contains two parallel rows of LED strip and power leads. The lighting section is sealed with polyurethane resin using SealFlow® technology.

What the 2300 K designation means

The manufacturer lists this version as 24 V, 60 W, 2300 K, IP68. The 2300 K figure describes the initial colour temperature of LED strip 16-2387-01. Its set datasheet separately gives a colour temperature of 2788 K after sealing. When matching this light with other fittings, compare the finished-set value rather than relying solely on the number in the commercial name.

For this strip in the SILEDA profile, the manufacturer specifies Ra 94 and R9 64. The quoted output of 956 lm relates to a 1 m section, not a declared total for the complete three-metre fitting. Keeping the measurement length in view helps avoid misleading comparisons with other linear lighting products.

Planning the three-metre run

The set is intended for surface mounting, and the product page also lists suspended mounting. Its narrow, straight form suits modern and minimalist linear or decorative lighting schemes. Compare the 3 m length with the planned lighting run and allow space for routing the leads.

Black OMYp / H03VVH2-F 2 × 0.5 mm² cables emerge from the rear at both ends of the profile, with 2 m of cable on each side. The exit points are protected with sealing compound. The power supply sits outside the profile, so its location needs to be included in the design of the 24 V installation.

Inside the sealed set

The datasheet lists the SILEDA profile, PROFI 24 V 1000 LED 2835 SMD 10 W strip and power cable. The IP68 rating refers to the finished sealed assembly. This listing is specifically the silver 3 m version, code 22-0101-78, rather than the shorter 2.02 m set or the version commercially designated 3000 K.