Lighting Rail SLV S-TRACK DALI 3-Phase Black 100 cm 1004937

The black SLV S-TRACK DALI 1004937 is a one-metre aluminium track section for the three-circuit lighting system. It is not a complete light fitting: it forms part of an installation assembled with compatible luminaires and connection components. Its narrow, straight profile leaves a continuous black line visible against the mounting surface.

A one-metre section with a 3.6 cm profile

The track is 100 cm long, with a width and height of 3.6 cm. Allow for this cross-section when planning a route beside ceiling trims, fitted furniture or other obstructions. The metre measurement describes the track section itself. Check the dimensions of the selected connectors and power feeds separately when calculating the overall installation length.

The black aluminium finish can be coordinated with other black S-TRACK components. The end-view photograph shows the internal profile, but visual similarity alone does not establish compatibility with another manufacturer's or system's parts.

Choose components within S-TRACK DALI

SLV identifies this section as part of its three-circuit S-TRACK DALI system. The manual prohibits combining the track and its components with parts from other track systems. Check the exact system designation of luminaires, adapters, connectors and feeds before ordering; matching the circuit count is not sufficient. Every open track end must be fitted with a suitable system end cap.

DALI is a system designation here. The track section does not replace luminaires or their controls: light colour, brightness and adjustment depend on the devices selected for the installation, rather than on the black profile.

Fixing and care

The manual permits ceiling installation and horizontal or vertical wall installation on an even surface. Electrical work requires a qualified electrician, a protective conductor connection and observance of the complete system's load limits. Use is restricted to dry indoor areas. Once the entire installation is disconnected from its power supply, external surfaces may be wiped with a cloth slightly moistened with water.