Lucide Grado 3-Light Black Aluminum Ceiling Spotlight

Lucide GRADO 22974/13/30 is a black ceiling spotlight with three slender cylindrical heads beneath a round ceiling plate. Its aluminium construction has a matt finish, with a visible honeycomb detail at the light openings. This is not an integrated LED fitting: it takes three separately purchased GU10 lamps in the smaller MR11 format.

Direct three heads from one ceiling position

The heads rotate and tilt, with Lucide specifying 360° rotation. You can therefore aim the light towards different parts of an interior without moving the ceiling plate. Consider this arrangement for selected surfaces in a living room, hallway, kitchen or study, rather than assuming that all three heads must point straight down. Whether one fitting provides enough light for the whole room depends on the chosen lamps, their distribution and the position of each head; the number of light points alone does not establish room coverage.

Choose the correct GU10 MR11 lamps

Light bulbs are not included. Each of the three sockets accepts a GU10 (MR11) lamp rated at no more than 12 W. Check both the cap designation and the lamp format when purchasing replacements: GU10 by itself does not identify the required physical size. Lucide recommends lamp 49094/04/30. Brightness and colour temperature depend on the lamps you install, rather than being fixed specifications of the fitting.

Dimming requires dimmable lamps together with a compatible dimmer, which is not supplied. Fitting an ordinary LED lamp does not, by itself, provide brightness adjustment.

Allow for the plate and overall height

The circular ceiling plate is 25 cm across and 2.5 cm high. Lucide gives the overall fitting height as 23 cm, with no height adjustment. Compare that measurement with the space available below your ceiling before installation. Each cylindrical head is 13.5 cm long and 3.9 cm in diameter. The plain geometric forms and uniform black finish suit modern and minimalist interiors. Installation materials are included. As a Class I fitting, GRADO requires a protective earth connection and should be installed by a qualified electrician.