Atom DL025-2-01W is a round Maytoni recessed downlight with a white aluminium body. The visible trim under the ceiling is 92 mm across, and the insert holding the bulb tilts by 25°, so the light can be aimed at a picture, a shelf or a section of wall instead of straight down.
Installation: cut-out and space above the ceiling
The fitting goes into an 80 mm hole cut with a hole saw, and two spring clips press it against the ceiling board from above. Maytoni gives an installation depth of 110 mm including the bulb — that much free space has to remain above the board, so it is worth measuring the void in a suspended ceiling before buying.
The supply cable connects to a two-pole terminal block, live and neutral. The fitting is protection class II, which means it needs no earth conductor. The bulb is pushed into the insert, which then slides into the body from below.
Which bulb and what light
The fitting takes one GU10 bulb, and Maytoni specifies 10 W for it — a figure typical of LED bulbs with this cap, whereas halogen GU10 lamps usually draw 35–50 W. No bulb is included, so you choose the colour and beam angle yourself: 2700–3000 K gives warm light for a living room or bedroom, while a narrow beam combined with the tilting insert suits highlighting individual objects.
The fitting is not intended for dimming. It is rated IP20, so it is installed in dry rooms.
Where it fits
Weighing 0.16 kg, with a plain, smooth trim and no ornament, the downlight does not stand out against a white ceiling. Its listed uses are the living room, bedroom and dining room, as well as hotel and restaurant interiors, where several such points are laid out in a row or a grid.
Oskar Zawada
November 16, 2019
I did not think that such a minimalist eye would fit into the look of my hallway.