Luces Exclusivas MORON LE41703 is a pendant formed as a single 80 cm diameter ring. A gold finish covers the aluminium profile, while a clear acrylic light element and fine suspension cables retain the broad circle below a cylindrical ceiling canopy. At a maximum height of 120 cm, the fitting establishes a clear focal point above a table or in the centre of a living area without blocking sightlines through its open middle.
Integrated 50 W LED producing 2727 lm
One built-in LED source forms part of the pendant and is included. It consumes up to 50 W, delivers 2727 lm and produces warm 3000 K light. Light conducted around the acrylic ring defines its circular outline and emerges along the complete profile instead of from a single point. This output can contribute to general illumination or provide a strong pool of light above a table, although the final result will depend on room size, surface colours and installation height. The module is integrated, so there is no separate bulb or lamp holder to select for the fitting.
An 80 cm gold-finished ring
The manufacturer describes the colour as gold and shades of gold. Aluminium and acrylic perform different roles: metal gives the profile rigidity and its finish, while the polymer creates the luminous section of the ring. An 80 cm diameter works best above a larger round or rectangular table, an island or within an open living space where the pendant can be seen from several directions. Allow for the 120 cm overall height before installation by measuring from the ceiling point to the lower edge and retaining comfortable clearance above a worktop or circulation route.
230 V and IP20 for a dry interior
MORON operates at 230 V. Its IP20 rating restricts it to dry indoor areas; the fitting has no water protection and should not be installed in wet zones. The fixing point must support the pendant's weight, and the suspension cables need to be levelled so that the ring hangs evenly. Isolate the supply, inspect the installation and preserve access to the canopy before connection. Electrical installation should be completed by a qualified professional in accordance with the instructions and local requirements.
