NORLYS 1908 is a steel ground anchor for selected outdoor lighting bollards. The galvanized component has a circular lower plate, an upright shaft and a top plate for connection to the luminaire. It is a mechanical mounting accessory; the lighting bollard is ordered separately.
Compatibility with Molde and Asker bollards
The manufacturer specifies the anchor for the individual Molde and Asker bollard articles listed on its product card. Check the exact article number of your luminaire against that compatibility table. The family name alone does not replace this check: the card names particular versions rather than every NORLYS light.
The anchor forms part of preparing an outdoor lighting point. It has no light source of its own and does not determine the electrical specifications of the installed lamp, which depend on the luminaire you select.
Dimensions of the mounting connection
The manufacturer's drawing shows a lower plate 168 mm in diameter and a top plate measuring 110 × 50 mm. The top plate dimensions describe its outline, not the spacing between holes. The instruction identifies four M6 × 50 fixings. These details should be compared with the mounting arrangement of the particular bollard; they do not establish universal compatibility with any base.
Cable route and installation preparation
The instruction shows an opening near the bottom of the shaft and a cable route up to the top plate. This allows the supply route to the selected luminaire to be considered before the anchor is installed. A cable drawn in the diagram does not mean that it is supplied with the anchor. Use the instructions for article 1908 together with the documentation for the compatible bollard: mechanical mounting and the lamp's electrical connection are separate parts of the installation.
Add your comment about NORLYS 1908 galvanized steel ground anchor for Molde and Asker bollards