NORLYS 3081CB is a mounting foot: a flat, rectangular plate in Copper Brown with four upright M6 threaded studs at its centre. The manufacturer calls it a special foot for Asker bollards and Molde fixtures — it is the part the luminaire stands on, not a light itself.
Which luminaires it fits
According to the manufacturer's product card, the foot is intended for the Asker, Asker Pro, Asker Pro Button and Asker Dc24v families and for Molde and Molde Dc24v. Luminaires are sold separately.
The manufacturer makes the same article in several colours, including aluminium, black and graphite, so the foot can be matched to the colour of the luminaire. The copper brown version carries the code 3081CB.
Dimensions and installation
The plate measures 200 × 130 mm and stands 50 mm tall including the studs. Those 20 × 13 cm are the footprint to allow for under the bollard — a figure to compare with the spot where the luminaire is going to stand. The foot weighs 0.40 kg.
Four holes in the corners are for screwing the plate to the substrate, and a square opening sits in the middle, between the studs. The installation manual shows four M6 nuts with washers threaded onto the studs — this is where the luminaire is fastened. The manufacturer rates it for ambient temperatures from −20 to +45 °C, and it carries the CE mark.
